Magigoo Original, 3D printing glue stick

Magigoo Original is an easy to use 3D printing adhesive designed to address 'the first layer not sticking problem' for general purpose filaments. Magigoo ensures a strong adhesion to the hot build plate. But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick! In addition, Magigoo helps to prevent warping. Regardless of you being a hobbyist or professional - it is extremely rewarding to have a 30 hour print complete without any warping and having it release easily once cooled. Available in 50ml and 120ml. Over 100 applications ABS, PLA, PETG, Facilan™ C8, ASA Easy application Easy release Easy clean No smell Non-toxic No additional tools needed Easy to transport Nicer print finish Main Features Easy application: applying Magigoo is as easy as child's play.
Magigoo Original is an easy to use 3D printing adhesive designed to address 'the first layer not sticking problem' for general purpose filaments. Magigoo ensures a strong adhesion to the hot build plate. But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick! In addition, Magigoo helps to prevent warping. Regardless of you being a hobbyist or professional - it is extremely rewarding to have a 30 hour print complete without any warping and having it release easily once cooled. Available in 50ml and 120ml. Over 100 applications ABS, PLA, PETG, Facilan™ C8, ASA Easy application Easy release Easy clean No smell Non-toxic No additional tools needed Easy to transport Nicer print finish Main Features Easy application: applying Magigoo is as easy as child's play. Shake, press, apply. Spread on an active printing area only. No need to cover the whole surface Easy-release: Magigoo adhesive properties are designed to release the 3D print once the build plate has cooled. Easy-clean: Magigoo is easily cleaned with water. Long-lasting: Magigoo last for 100+ average prints. Odorless and safe: Magigoo is safe to use - be it in a closed room or educational workshop with kids. Important note : The applicator has an active spring valve, which activates when applicator is pressed against the build plate. Please do not press the bottle as ketchup bottle , otherwise the applicator may pop off. Bottle may be slightly squeezed, only when the nib is pressed against the bed and it may be necessary only if bigger flow is required. Bottle must not be squeezed when cap is off any other time as it may result in glue popping out of the bottle. TDS: You can find the Technical Data Sheet for Magigoo HT here. MSDS: You can find the Safety Data Sheet for Magigoo HT here. Manual: You can find the Manual for the Magigoo HT here.

3D Printing First-Layer Adhesive - The Magigoo Glue Stick - BigRep

Magigoo is an all-in-one 3D printing adhesive that offers sure adhesion with Magic release. What is Magigoo for? It is an easy to use 3D printing adhesive designed to address the first layer not sticking problem, the most common problem found in FFF 3D printing technology. This problem occurs when a print detaches itself from the printing platform ruining itself. Perfecting the first layer is vital to get a great foundation for rest of the print.

Magigoo Original All-In-One 3D Printing Adhesive

Jual PREMIUM Magigoo Sample Series

Magigoo ORIGINAL glue stick 50ml

Free 3D file Magigoo and Glue Stick Holders 🧞‍♂️・3D printable

Magigoo Original All-In-One 3D Printing Adhesive

3D Glue Magigoo PP 50 ml

Magigoo Filament2Print

GLUE STICK - BigRep HUB

The Magigoo PRO Bed Adhesion kit was designed with professional 3D printing users in mind. Comprised of four specialized adhesives – each designed to work exclusively with technical filaments – the Magigoo Pro Adhesion kit has your adhesion needs covered no matter the material.